JAI TM-6710 operation manual Operation Video Output, Timing

Page 23

Operation

3.3.8Video Output

3.3.8 (a) Async Reset Image Capture

FIGURE 13. Async Reset Image Capture

VINIT

VD

CAPTURED VIDEO

ANALOG

VIDEO

DIGITAL

VIDEO

One-shot sync

DIGITAL

VIDEO

FDV (continuous sync)

3.3.8 (b) Integration Image Capture

Set the integration control (pin #11) to low for integration. Integrated video can be captured once integration control goes back to high.

FIGURE 14. Integrated Image Capture

Int Cont

Captured Integrated Video	Integrated	Normal
Captured Video	Video	Video
Video
Normal Video		Normal Video

3.3.9Timing

3.3.9 (a) Digital Video

Differential line-driven, 2 x 8-bit parallel signal with EIA-644 format. 100ohms output termination impedance. Output from 51-pin connector. Mating connector: Airborne MQ3130511130000. Please consult digital cable information, e.g., 50DG-02LP 2m cable. The TM-6710CL uses the 26CL-02-26 Camera Link cable.

3.3.9 (b) Line Data Valid

Differential line-driven signal with EIA-644 format. It is active high (+ side is higher than - side) during the transfer of each line of data.....horizontal line readout.

TM-6710/6710CL High-Speed Progressive Scanning CCD Camera