General, Standard Composition, Main Features

CV-A50 / CV-A60

1. General

The difference from the previous manual is that the CCD sensor in CV-A50 is changed to new types. Now the used CCD sensors are: ICX-408AL-6, 409AL-6, 418ALL-6, 419ALL-6.

The CV-A50/A60 is a range of monochrome CCIR and EIA interlaced 1/2” and 1/3” CCD cameras, designed for automated application, featuring an extremely small housing and a wide range of unique functions.

The asynchronous trigger can be set to work in several modes, to allow functions such as pulse width controlled shutter, programmable shutter speed and long time integration.

All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the need for mechanical switches of jumpers.

The CV-A50 and CV-A60 output an analogue video signal, with composite sync.

The latest version of this manual can be downloaded from: www.jai.com

The latest version of Camera Control Tool for CV-A50/60 can be downloaded from: www.jai.com

2. Standard Composition

The standard camera composition consists of the camera main body.

3.Main Features

•New compact size 1/2” and 1/3” monochrome CCD cameras

•752 (h) x 582 (v) pixels for CCIR, 768 (h) x 494 (v) for EIA

•Improved sensitivity, dynamic range and smear performance

•High S/N ratio > 60dB

•Extended range of functions and options compared to CV-M50

•Interlaced or non-interlaced scanning. Field or frame accumulation.

•Internal, external HD/VD or random synchronization

•Edge pre-select, pulse width and start/stop trigger modes

•Long time exposure with external VD pulse

•Frame delay readout mode

•Exposure enable EEN, write enable WEN and pixel clock out

•No mechanical switches or jumpers for mode setting

•Short ASCII commands for modes setting via serial port

•Shutter speed down to 1/10,000 in 8 steps

•Windows 98/NT/ME/2000 setup software

- 2 -