JAI CV-M91 operation manual Trigger Modes, Long time integration

Page 10

CV-M91

6.2. Trigger Modes

This camera can operate in 5 primary modes. 1 non-triggered, 3 external H synchronous trigger modes and 1 long time integration mode.

1.

Normal continuous Mode.

Pre-selected exposure.

2.

Edge Pre-select Mode.

Pre-selected exposure.

3.

Pulse Width Control Mode.

Pulse width controlled exposure.

4.

Start Stop Mode

Exposure start on trigger, end after ext. VD

5.

Long time integration

Accumulation controlled by ext. VD interval

In normal continuous mode and edge pre-select mode the shutter time can be selected from the 8 fixed steps. To avoid jitter, the trigger should be synchronized to HD as shown in fig. 11.

Fig. 11. Trigger/HD timing.

756 clk NTSC

744 clk PAL

Fig. 12. Horizontal timing with ext. HD sync.

- 9 -

Image 10
Contents CV-M91 Table of Contents CV-M91General Main FeaturesStandard Composition Locations and Functions LocationsPin no Signal Remarks Pin Multi-connector DC-IN/TriggerPin Multi-connector Trigger and RS232C Pin AssignmentPin no Pin Sub D-connector VideoInput and Output Circuits Video outputsPrism unit HD, VD, WEN, EEN and Pclk outputFunctions and Operations Input/Output of SignalsInput/output of HD/VD VBS out on pin#4 12 pin Internal sync out/WEN outInternal pixel clock out Out/VBS out on pin#6 9 pin sub-DTrigger Modes Long time integrationContinuous Operation Non triggered PAL horizontal timingVertical timing PAL interlaced Vertical timing Ntsc interlaced Edge Pre-select Mode Vertical timing for edge pre-select PALPulse Width Control Mode Vertical timing for pulse width control PALStart Stop Mode Start stop interlaced field integrationLong time integration Long time interlaced field integrationOther Functions Switch settings inside Configuring the CameraSwitch settings 1. SW1 on rear panelJumper settings inside ShortSwitch and jumper positions Board positionsCV-M91command list RS-232C controlCamera Control Tool for CV-M91 Window from camera control toolSpecifications External Appearance and DimensionsSpectral sensitivity Specification table CV-M91PCV-M91 Opto-mechanical specifications Opto mechanical specificationsTypical CCD Characteristics PrecautionsAppendix Users Record Users Mode Settings Users ModificationsCamera type CV-M91 Revision Revision a Serial No ……………