EverFocus EDN850H user manual Exit

Page 41

EDN850H

4.4.2.8.8 RESET

Press the SET button on RESET for 3 seconds until it restarts. It will go to factory default value.

SPECIAL
CAMERA ID	OFF
COLOR ADJ. <┘
SYNC.	INT
MOTIION DET	OFF
PRIVACY	OFF
MIRROR	OFF
SHARPNESS	ON <┘

>RESET RETURN <┘

4.4.2.8.9RETURN

Press the SET button on RETURN. It saves all settings in SPECIAL menu and returns to the Setup menu.

SPECIAL
CAMERA ID	OFF
COLOR ADJ. <┘
SYNC.	INT
MOTIION DET	OFF
PRIVACY	OFF
MIRROR	OFF
SHARPNESS	ON <┘
RESET
> RETURN <┘

4.4.2.9 EXIT

Press the SET button on EXIT after you finish all the settings. It will return to live

image.

Note:

If you quit the Menu without pressing EXIT, all the settings you previously did will NOT be saved.

41

Image 41

Contents EDN850H EDN850H EDN850H About this document Safety NoticeAbout AC Adaptor Terms and TrademarkSupport Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting Information System Info2 Log User Config EDN850H Network NetworkIP address IP TypeSubnet Mask GatewayEDN850H Primary DNS PasswordSecondary DNS UsernameEDN850H Bandwidth SMTP/FTP EDN850H Video Network Alarm reserved for PowerConMulti Streaming Camera SET button Shutter EDN850H 4.4.2.1 LensPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control AGC Auto Gain Control EDN850H 4.4.2.4 BacklightEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H Date/Time SystemEDN850H Daylight Saving SD Card Indication Description Browse MaintenanceEDN850H Specifications Physical USA Office Head Office China OfficeEurope Office USA N.Y. Office