EverFocus EDN850H user manual Audio

Page 42

EDN850H

4.5 Audio

The EDN850H camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings.

Audio

Check Enable Audio box to enable audio function.

Audio Input: Audio from an internal microphone or a line source can be connected to the Audio connector of EDN850H. The audio source can be selected from Internal Microphone, External Audio Input L and External Audio Input R.

Audio Input volume: Adjust the Audio Input Volume for the audio input devices connected to the camera if there are problems with the sound input being too low or high.

Press Apply to apply the setting changes or Reset to reset without saving the change.

42

Image 42

Contents EDN850H EDN850H Safety Notice EDN850H About this documentTerms and Trademark SupportAbout AC Adaptor Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting System Info Information2 Log User Config EDN850H Network NetworkSubnet Mask IP TypeIP address GatewaySecondary DNS PasswordEDN850H Primary DNS UsernameEDN850H Bandwidth SMTP/FTP EDN850H Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EDN850H 4.4.2.1 Lens ShutterPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control EDN850H 4.4.2.4 Backlight AGC Auto Gain ControlEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H System Date/TimeEDN850H Daylight Saving SD Card Indication Description Maintenance BrowseEDN850H Specifications Physical Europe Office Head Office China OfficeUSA Office USA N.Y. Office