EverFocus EDN850H user manual Time Mask

Page 49

EDN850H

preceding the trigger. Input the desired length of pre-trigger buffer time. It can be set up to 120 seconds.

Post-Alarm Buffer: Image saved internally in the server from the time immediately after the trigger. Input the desired length of post-trigger buffer time. It can be set up to 120 seconds.

Press Apply to apply the setting changes or Reset to reset without saving the change.

Re-trigger Filter Setting

Re-trigger Filter: Set a re-trigger filter time, if another event is triggered during this time, this triggered event will be ignored.

Press Apply to apply the setting changes or Reset to reset without saving the change.

4.7.4 Time Mask

Time Mask Setting

Time mask setting allows you to schedule event actions.

Select Always for event action to be taken continuously.

49

Image 49
Contents EDN850H EDN850H EDN850H About this document Safety NoticeSupport Terms and TrademarkAbout AC Adaptor Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting Information System Info2 Log User Config EDN850H Network NetworkIP address IP TypeSubnet Mask GatewayEDN850H Primary DNS PasswordSecondary DNS UsernameEDN850H Bandwidth SMTP/FTP EDN850H Video Network Alarm reserved for PowerConMulti Streaming Camera SET button Shutter EDN850H 4.4.2.1 LensPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control AGC Auto Gain Control EDN850H 4.4.2.4 BacklightEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H Date/Time SystemEDN850H Daylight Saving SD Card Indication Description Browse MaintenanceEDN850H Specifications Physical USA Office Head Office China OfficeEurope Office USA N.Y. Office