EverFocus EDN850H user manual Event

Page 44

EDN850H

4.7 EVENT

An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed.

This table describes how to setup action types and event type.

Event Type		Manual	Motion	Schedule
Action Type	Alarm Input	Trigger	Detection	Recording	Pre/Post-Alarm
Trigger Alarm	x	x	x
Send Mail notification	x	x	x
Upload to FTP**	x	x	x		x
Record to SD Card	x	x	x	x	x
Record to PC*	x	x	x	x	x
Network Alarm	x	x	x
Re-trigger	x	x	x

Note: 1. * Record to PC only works when PC and IP camera are connected.

2.**Either Upload to FTP or Record to Network Storage can be selected to record event video to remote site.

3.Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to upload images.

44

Image 44

Contents EDN850H EDN850H Safety Notice EDN850H About this documentAbout AC Adaptor Terms and TrademarkSupport Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting System Info Information2 Log User Config EDN850H Network NetworkIP Type IP addressSubnet Mask GatewayPassword EDN850H Primary DNSSecondary DNS UsernameEDN850H Bandwidth SMTP/FTP EDN850H Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EDN850H 4.4.2.1 Lens ShutterPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control EDN850H 4.4.2.4 Backlight AGC Auto Gain ControlEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H System Date/TimeEDN850H Daylight Saving SD Card Indication Description Maintenance BrowseEDN850H Specifications Physical Head Office China Office USA OfficeEurope Office USA N.Y. Office