EverFocus EDN850H user manual

Page 39

EDN850H

1.The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40.

AREA1

2.Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10,

DOWN: 45, LEFT: 20 and RIGHT: 40.

AREA1

3.Increase TOP scale value by 20. AREA1 position after change is: TOP: 30,

DOWN: 45, LEFT: 20 and RIGHT: 40.

AREA1

4.Increase RIGHT scale value by 20. AREA1 position after change is: TOP: 30,

DOWN: 45, LEFT: 20 and RIGHT: 60.

AREA1

39

Image 39

Contents EDN850H EDN850H EDN850H About this document Safety NoticeTerms and Trademark SupportAbout AC Adaptor Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting Information System Info2 Log User Config EDN850H Network NetworkGateway IP TypeIP address Subnet MaskUsername PasswordEDN850H Primary DNS Secondary DNSEDN850H Bandwidth SMTP/FTP EDN850H Video Network Alarm reserved for PowerConMulti Streaming Camera SET button Shutter EDN850H 4.4.2.1 LensPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control AGC Auto Gain Control EDN850H 4.4.2.4 BacklightEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H Date/Time SystemEDN850H Daylight Saving SD Card Indication Description Browse MaintenanceEDN850H Specifications Physical USA N.Y. Office Head Office China OfficeUSA Office Europe Office