EverFocus EDN850H user manual SET button

Page 26

EDN850H

OSD setting:

Use the following buttons on the operation panel to operate the "Camera OSD setting" using a PC. (Please refer to 4.4.2.1 for detail guide of Camera OSD Setting)

[SET] button:

Click this button to move to the submenu.

[Left] button/ [Right] button:

Click these buttons to select the parameters.

[Down] button/ [Up] button:

Click these buttons to move the cursor.

ICR Switch Setting:

AUTO: ICR switches automatically according to the illumination.

B/W: Select to keep B/W image.

COLOR: Select to keep color image.

26

Image 26

Contents EDN850H EDN850H Safety Notice EDN850H About this documentAbout AC Adaptor Terms and TrademarkSupport Table of Contents EDN850H Introduction Accessing the Camera Menu EDN850H EDN850H Setting System Info Information2 Log User Config EDN850H Network NetworkSubnet Mask IP TypeIP address GatewaySecondary DNS PasswordEDN850H Primary DNS UsernameEDN850H Bandwidth SMTP/FTP EDN850H Network Alarm reserved for PowerCon VideoMulti Streaming Camera SET button EDN850H 4.4.2.1 Lens ShutterPress SET button when you finish all the settings EDN850H 4.4.2.3 White Balance Control EDN850H 4.4.2.4 Backlight AGC Auto Gain ControlEDN850H 4.4.2.6 DNR Dynamic Noise Reduction EDN850H 4.4.2.7 SENS-UP EDN850H 4.4.2.8 Special Color ADJ Adjust the Color Gain from 0 ~ Motion Detection AREA1 AREA2 AREA3 AREA4 EDN850H Privacy TOP EDN850H Color ADJ Level Exit Audio User Event Event EDN850H Motion Alarm Time Mask EDN850H System Date/TimeEDN850H Daylight Saving SD Card Indication Description Maintenance BrowseEDN850H Specifications Physical Europe Office Head Office China OfficeUSA Office USA N.Y. Office