EverFocus EAN-1350 manual Lens Mounting

Page 10

2.2 LENS MOUNTING

For lens mounting, remove the protection cover at the front and screw the lens on the camera body.

The EAN-1350 camera supports lenses with manual iris and DC-controlled iris. Please make sure, that the used lens supports 1/3" CCD chip format.

It is recommanded to use Megapixel lenses to achieve best image quality.

If a C-Mount lens is used, mount the C-Mount adapter between camera and lens.

If it is not possible to get a focussed image by lens focus adjustment, correct the backfocus by the lever on top of the camera. Unlock the fixation screw first by the hex key (in camera package).

If a DC-controlled lens is installed, make sure to connect the control cable to the DC iris socket ("IRIS") at the right side of the camera.

10 of 59

Image 10

Contents EAN-1350 Safety warnings WeeeTable of Contents Event Server Introduction FeaturesDelivery Scope Specifications System RequirementsCommunication Software Features / FunctionsAudio SoftwareHardware Installation Backpanel ConnectorsPage Lens Mounting Video Installation for Camera / Lens Adjustment Camera MountingInstallation of dry N.O. contact with camera power source Alarm IN- / OUT InstallationAlarm Inputs Terminal pin assignmentAlarm Output Installation with dry N.O. contact using external DC voltageAudio Installation RS-485 Telemetry InstallationNetwork Installation / Wiring Power Input ConnectionNetwork Installation / Basic IP Setup with IP-FINDER IP- SetupNetwork Installation / Router Settings Network Installation / Browser Setup Active X Installation AT First Time LoginPage After successful login the main screen appears Main Operation ScreenSetup Screen Settings Basic SettingSystem Syslogd Service System LogVideo / Image VideoPreProc Display Text SensorBackground color Date Time PositionAGC Audio PTZ Driver Manager DeletePTZ Driver Upload Serial port settingsPort mode PortMaximum number of simultaneous User setting Anonymous loginAdd / Modify / Delete User ViewersAudio Setting Date / Time User Setting Network Live View Record File Path System Setting Video SettingEvent Setting Dhcp NetworkNetwork DNS1 / DNS2Http ServicesStreaming RtspPPPoE Ddns DdnsUPnP Traversal Active UPnP Setting ActiveUPnP Port rangeFirewall settings To activate the UPnP function in Windows OSSmtp Enable enable Smtp authentificationSmtp Samba SambaNotification Notification SettingIf activated, enter access data to the FTP server If activated, enter email address Email subjectMulticast Multicast SettingSimilar setting procedure for both modes MPEG-4 / M-JPEGDate / Time NTPIP Filtering Switch fromEnd time Event Settings Application SettingEvent Add / Modify EventOn boot Event Setting NameTrigger by Alarm input Active alarm outSend NAP Go to presetSend TCP LocationTrigger Event Server Detect level Motion detection Setting Area 1 ~Motion Detection Area3Firmware Upgrade Factory Default Reboot Main Screen Controls General and Video SettingsOperation Control item Function Language selectionEvent Alerts Alternative PTZ mode by mouse PAN / Tilt / ZoomRecord / Snapshot Setting Manual Record Manual SnapshotListen Full Screen ModeAudio SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp