EverFocus EAN-1350 manual Motion Detection, Motion detection Setting Area 1 ~, Detect level, Area3

EAN-1350 Installation / Operation

6.2 MOTION DETECTION

The EAN-1350 offers motion detection in 3 independent zones. Zone 3 can be defined as "Exclusive" zone, no motion will be detected.

Setup of "EXCLUSIVE" zone:

Motion detection	Setting
Area 1 ~ 3	Set the checkbox to enable the motion detection zone.
	Click on "AREA1(2,3)" to show the detection area. Click in der
	middle of the zone to move the area, click at the borders to
	change area size.
Detect level	Detection sensitivity setup, 5 steps available.
Area3 >	Activate the "EXCLUSIVE" checkbox for zone 3 to set this zone to
EXCLUSIVE	"No Detection" mode. This function is useful to cover areas in
	other detection zones, where false alarms are expected (e.g.
	moving trees)
	48 of 59