EverFocus EAN-1350 manual Event Alerts

Page 53

EAN-1350 Installation / Operation

Transmission mode of the video stream, the ideal mode depends on the network conditions:

UDP: Provides the fastest but most unreliable transmission service. Video steams are transmitted through UDP Port (50000~60000 by default) to ensure the fastest image transmission. However, video fragment or mosaics may occur due to poor transmission quality.

TCP: Provides reliable data transmission. Video streams are transmitted through RTSP Port (554 by default) to avoid video fragment or mosaics due to poor transmission quality.

HTTP: Video streams are transmitted through HTTP Port (80 by default) to ensure passing through firewalls.

Image settings for Brightness, sharpness, contrast, Hue and saturation.

Use the slider to adjust best image quality.

Iris level: If a lens with DC - Autoiris is installed, the Iris level can be adjusted here. "-" closes the iris, "+" opens the iris.

7.3 EVENT ALERTS

Event alert indicator. The display is flashing red in case of event.

Event alert list.

Appearing events are listed in the message box.

Alert Snapshot: With activated checkbox a single event picture will be stored.

Clear: Delete all alert messages in the box.

53 of 59

Image 53
Contents EAN-1350 Weee Safety warningsTable of Contents Event Server Delivery Scope FeaturesIntroduction System Requirements SpecificationsAudio Software Features / FunctionsCommunication SoftwareBackpanel Connectors Hardware InstallationPage Lens Mounting Camera Mounting Video Installation for Camera / Lens AdjustmentAlarm Inputs Alarm IN- / OUT InstallationInstallation of dry N.O. contact with camera power source Terminal pin assignmentInstallation with dry N.O. contact using external DC voltage Alarm OutputRS-485 Telemetry Installation Audio InstallationPower Input Connection Network Installation / WiringNetwork Installation / Router Settings IP- SetupNetwork Installation / Basic IP Setup with IP-FINDER Active X Installation AT First Time Login Network Installation / Browser SetupPage Main Operation Screen After successful login the main screen appearsSystem Settings Basic SettingSetup Screen System Log Syslogd ServiceVideo Video / ImagePreProc Background color SensorDisplay Text Date Time PositionAGC Audio Delete PTZ Driver ManagerPort mode Serial port settingsPTZ Driver Upload PortAdd / Modify / Delete User User setting Anonymous loginMaximum number of simultaneous ViewersEvent Setting Live View Record File Path System Setting Video SettingAudio Setting Date / Time User Setting Network Network NetworkDhcp DNS1 / DNS2Streaming ServicesHttp RtspPPPoE Ddns DdnsUPnP UPnP Setting ActiveUPnP Traversal Active Port rangeTo activate the UPnP function in Windows OS Firewall settingsSmtp Enable enable Smtp authentificationSmtp Samba SambaIf activated, enter access data to the FTP server Notification SettingNotification If activated, enter email address Email subjectSimilar setting procedure for both modes Multicast SettingMulticast MPEG-4 / M-JPEGNTP Date / TimeEnd time Switch fromIP Filtering Event Settings Application SettingEvent Add / Modify EventTrigger by Alarm input Event Setting NameOn boot Active alarm outSend TCP Go to presetSend NAP LocationTrigger Event Server Motion Detection Motion detection Setting Area 1 ~Detect level Area3Firmware Upgrade Factory Default Reboot Operation General and Video SettingsMain Screen Controls Control item Function Language selectionEvent Alerts PAN / Tilt / Zoom Alternative PTZ mode by mouseRecord / Snapshot Setting Manual Snapshot Manual RecordAudio Full Screen ModeListen SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp