EverFocus EAN-1350 manual Audio

Page 26

5.4 AUDIO

The EAN-1350 provides bidirectional audio transmission with different quality options.

Mode

Full duplex: Allows using a microphone and amplifier at the

 

 

same time, or turning them off at main page.

 

Half duplex: Allows using a microphone or amplifier by manual

 

 

switch.

 

Simplex microphone only: Allows using the microphone only.

 

Simplex amplifier only: Allows using the speaker only.

 

Audio off:

Turns audio off; i.e. both the microphone and

 

 

speaker are inactive.

Audio In

 

 

Codec

G726/24:

Uses G.726 24Kbps for audio encryption.

 

G726/32:

Uses G.726 32Kbps for audio encryption.

 

G711a:

Uses G.711 a-law 64Kbps for audio encryption.

 

G711u:

Uses G.711 u-law 64Kbps for audio encryption.

Gain

Audio in gain (volume) adjustment 10~100%

Audio out

 

 

Codec

G726/24:

Uses G.726 24Kbps for audio decryption.

 

G726/32:

Uses G.726 32Kbps for audio decryption.

 

G711a:

Uses G.711 a-law 64Kbps for audio decryption.

 

G711u:

Uses G.711 u-law 64Kbps for audio decryption.

Gain

Audio out gain (volume) adjustment 10~100%

26 of 59

Image 26
Contents EAN-1350 Safety warnings WeeeTable of Contents Event Server Delivery Scope FeaturesIntroduction Specifications System RequirementsCommunication Software Features / FunctionsAudio SoftwareHardware Installation Backpanel ConnectorsPage Lens Mounting Video Installation for Camera / Lens Adjustment Camera MountingInstallation of dry N.O. contact with camera power source Alarm IN- / OUT InstallationAlarm Inputs Terminal pin assignmentAlarm Output Installation with dry N.O. contact using external DC voltageAudio Installation RS-485 Telemetry InstallationNetwork Installation / Wiring Power Input ConnectionNetwork Installation / Router Settings IP- SetupNetwork Installation / Basic IP Setup with IP-FINDER Network Installation / Browser Setup Active X Installation AT First Time LoginPage After successful login the main screen appears Main Operation ScreenSystem Settings Basic SettingSetup Screen Syslogd Service System LogVideo / Image VideoPreProc Display Text SensorBackground color Date Time PositionAGC Audio PTZ Driver Manager DeletePTZ Driver Upload Serial port settingsPort mode PortMaximum number of simultaneous User setting Anonymous loginAdd / Modify / Delete User ViewersEvent Setting Live View Record File Path System Setting Video SettingAudio Setting Date / Time User Setting Network Dhcp NetworkNetwork DNS1 / DNS2Http ServicesStreaming RtspPPPoE Ddns DdnsUPnP Traversal Active UPnP Setting ActiveUPnP Port rangeFirewall settings To activate the UPnP function in Windows OSSmtp Enable enable Smtp authentificationSmtp Samba SambaNotification Notification SettingIf activated, enter access data to the FTP server If activated, enter email address Email subjectMulticast Multicast SettingSimilar setting procedure for both modes MPEG-4 / M-JPEGDate / Time NTPEnd time Switch fromIP Filtering Event Settings Application SettingEvent Add / Modify EventOn boot Event Setting NameTrigger by Alarm input Active alarm outSend NAP Go to presetSend TCP LocationTrigger Event Server Detect level Motion detection Setting Area 1 ~Motion Detection Area3Firmware Upgrade Factory Default Reboot Main Screen Controls General and Video SettingsOperation Control item Function Language selectionEvent Alerts Alternative PTZ mode by mouse PAN / Tilt / ZoomRecord / Snapshot Setting Manual Record Manual SnapshotListen Full Screen ModeAudio SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp