EverFocus EAN-1350 manual Manual Record, Manual Snapshot

Page 56

EAN-1350 Installation / Operation

7.6 MANUAL RECORD

Press on "REC" to start a manual record. The file format is AVI. The storage location is defined by the "PATH" icon.

The icon will start to flash.

A RECORD symbol appears in lower left corner of the video window.

Press "REC" again to stop the record. The record will also stop after reaching maximum file size / maximum recording duration, which is defined in "PATH".

Note: Record will also stop with closing the Browser!

7.7 MANUAL SNAPSHOT

Pressing this icon will create a snashot of current video image in JPG format.

The message box below shows the path of saved image:

56 of 59

Image 56
Contents EAN-1350 Safety warnings WeeeTable of Contents Event Server Delivery Scope FeaturesIntroduction Specifications System RequirementsSoftware Features / Functions AudioCommunication SoftwareHardware Installation Backpanel ConnectorsPage Lens Mounting Video Installation for Camera / Lens Adjustment Camera MountingAlarm IN- / OUT Installation Alarm InputsInstallation of dry N.O. contact with camera power source Terminal pin assignmentAlarm Output Installation with dry N.O. contact using external DC voltageAudio Installation RS-485 Telemetry InstallationNetwork Installation / Wiring Power Input ConnectionNetwork Installation / Router Settings IP- SetupNetwork Installation / Basic IP Setup with IP-FINDER Network Installation / Browser Setup Active X Installation AT First Time LoginPage After successful login the main screen appears Main Operation ScreenSystem Settings Basic SettingSetup Screen Syslogd Service System LogVideo / Image VideoPreProc Sensor Background colorDisplay Text Date Time PositionAGC Audio PTZ Driver Manager DeleteSerial port settings Port modePTZ Driver Upload PortUser setting Anonymous login Add / Modify / Delete UserMaximum number of simultaneous ViewersEvent Setting Live View Record File Path System Setting Video SettingAudio Setting Date / Time User Setting Network Network NetworkDhcp DNS1 / DNS2Services StreamingHttp RtspPPPoE Ddns DdnsUPnP Setting Active UPnPUPnP Traversal Active Port rangeFirewall settings To activate the UPnP function in Windows OSSmtp Enable enable Smtp authentificationSmtp Samba SambaNotification Setting If activated, enter access data to the FTP serverNotification If activated, enter email address Email subjectMulticast Setting Similar setting procedure for both modesMulticast MPEG-4 / M-JPEGDate / Time NTPEnd time Switch fromIP Filtering Settings Application Setting EventEvent Add / Modify EventEvent Setting Name Trigger by Alarm inputOn boot Active alarm outGo to preset Send TCPSend NAP LocationTrigger Event Server Motion detection Setting Area 1 ~ Motion DetectionDetect level Area3Firmware Upgrade Factory Default Reboot General and Video Settings OperationMain Screen Controls Control item Function Language selectionEvent Alerts Alternative PTZ mode by mouse PAN / Tilt / ZoomRecord / Snapshot Setting Manual Record Manual SnapshotFull Screen Mode AudioListen SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp