2.8 NETWORK INSTALLATION / WIRING
Depending on the network environment at installation site, connect camera network connector to the LAN (switch, router, PC...).
Use CAT.5 cable or better for installation.
The camera network interface is
LED: Network link 
LED: Network traffic
The LEDs at the network socket inicate the status of network connection:
Network link (right): ON, if network is connected
Network traffic (left): blinks in interval at any network traffic
2.9 POWER INPUT CONNECTION
The
The power input is
For 12 V DC connection use stabilized power supplies only.
The camera provides alternative powering by PoE (Power over Ethernet) via network interface.
15 of 59