EverFocus EAN-1350 manual IP Filtering, Switch from, End time

Page 42

EAN-1350 Installation / Operation

Switch from

Time for switching to DST and updated

time

End time

End date of DST

 

Switch from

Time for switching off DST and updated

time

5.7.12 IP Filtering

The EAN-1350 provides IP filtering for network access to the camera based on a blacklist or whitelist.

IP Filtering

Setting

IP - Filtering

Enable: IP - Filtering active

 

Disable: IP - Filtering off

Policy

Allow: "whitelist" mode, all entered IP - Adresses can access the

 

camera, other IP - addresses are blocked

 

Deny: "blacklist" mode, all entered IP - addresses have no

 

access to the camera

Filtered IP -

 

addresses

 

Add

For adding an IP - address to the list enter an IP - address below

 

the list and press "Add".

Remove

To remove an address from filter select an IP - address from the

 

list and press "Remove".

Remove all

Removes all IP - addresses from the list.

42 of 59

Image 42
Contents EAN-1350 Safety warnings WeeeTable of Contents Event Server Features IntroductionDelivery Scope Specifications System RequirementsCommunication Software Features / FunctionsAudio SoftwareHardware Installation Backpanel ConnectorsPage Lens Mounting Video Installation for Camera / Lens Adjustment Camera MountingInstallation of dry N.O. contact with camera power source Alarm IN- / OUT InstallationAlarm Inputs Terminal pin assignmentAlarm Output Installation with dry N.O. contact using external DC voltageAudio Installation RS-485 Telemetry InstallationNetwork Installation / Wiring Power Input ConnectionIP- Setup Network Installation / Basic IP Setup with IP-FINDERNetwork Installation / Router Settings Network Installation / Browser Setup Active X Installation AT First Time LoginPage After successful login the main screen appears Main Operation ScreenSettings Basic Setting Setup ScreenSystem Syslogd Service System LogVideo / Image VideoPreProc Display Text SensorBackground color Date Time PositionAGC Audio PTZ Driver Manager DeletePTZ Driver Upload Serial port settingsPort mode PortMaximum number of simultaneous User setting Anonymous loginAdd / Modify / Delete User ViewersLive View Record File Path System Setting Video Setting Audio Setting Date / Time User Setting NetworkEvent Setting Dhcp NetworkNetwork DNS1 / DNS2Http ServicesStreaming RtspPPPoE Ddns DdnsUPnP Traversal Active UPnP Setting ActiveUPnP Port rangeFirewall settings To activate the UPnP function in Windows OSEnable enable Smtp authentification SmtpSmtp Samba SambaNotification Notification SettingIf activated, enter access data to the FTP server If activated, enter email address Email subjectMulticast Multicast SettingSimilar setting procedure for both modes MPEG-4 / M-JPEGDate / Time NTPSwitch from IP FilteringEnd time Event Settings Application SettingEvent Add / Modify EventOn boot Event Setting NameTrigger by Alarm input Active alarm outSend NAP Go to presetSend TCP LocationTrigger Event Server Detect level Motion detection Setting Area 1 ~Motion Detection Area3Firmware Upgrade Factory Default Reboot Main Screen Controls General and Video SettingsOperation Control item Function Language selectionEvent Alerts Alternative PTZ mode by mouse PAN / Tilt / ZoomRecord / Snapshot Setting Manual Record Manual SnapshotListen Full Screen ModeAudio SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp