EverFocus EAN-1350 manual Safety warnings, Weee

Page 2

Safety warnings

To avoid any damage, please consider the following safety warnings:

Never place the recorder near to heaters, furnaces, other heat sources or under direct solar irradiation.

Operate the device only in locations providing the tolerable operating temperature range 0°C~40°C.

Make sure that the device‘s ventilation slots are not covered or sheeted.

For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent.

Install the device only in dry and dustproof surroundings. Protect the device against any liquid‘s penetration.

Avoid the penetration of any artefacts.

Do not open the recorder yourself. In case of malfunction, contact your local installer or dealer. Unauthorized opening of the device will annul the warranty claim!

Avoid any affection of the device through vibrations or mechanical shock at the recorder‘s installation location.

.

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this case, the user may be urged to take adequate measures.

This equipment has been tested and found to comply to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment andreceiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

This Product is RoHS compliant.

WEEE

Your EverFocus product is designed and manufactured

Ihr EverFocus Produkt wurde entwickelt und

with high quality materials and components which can

hergestellt mit qualitativ hochwertigen Materialien

 

be recycled and reused.

und Komponenten, die recycelt und wieder

 

This symbol means that electrical and electronic

verwendet werden können.

 

equipment, at their end-of-life, should be disposed of

Dieses Symbol bedeutet, dass elektrische und

 

separately from your household waste.

elektronische Geräte am Ende ihrer Nutzungsdauer

 

Please, dispose of this equipment at your local

vom Hausmüll getrennt entsorgt werden sollen.

 

community waste collection/recycling centre.

Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen

 

In the European Union there are separate collection

kommunalen Sammelstelle oder im Recycling

 

systems for used electrical and electronic product.

Centre.

 

Please, help us to conserve the environment we live in!

Helfen Sie uns bitte, die Umwelt zu erhalten, in der

 

 

wir leben.!

 

 

 

The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products. Therefore, all specifications are subject to change without prior notice. Misprints reserved. Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.

2 of 59

Image 2
Contents EAN-1350 Safety warnings WeeeTable of Contents Event Server Delivery Scope FeaturesIntroduction Specifications System RequirementsCommunication Software Features / FunctionsAudio SoftwareHardware Installation Backpanel ConnectorsPage Lens Mounting Video Installation for Camera / Lens Adjustment Camera MountingInstallation of dry N.O. contact with camera power source Alarm IN- / OUT InstallationAlarm Inputs Terminal pin assignmentAlarm Output Installation with dry N.O. contact using external DC voltageAudio Installation RS-485 Telemetry InstallationNetwork Installation / Wiring Power Input ConnectionNetwork Installation / Router Settings IP- SetupNetwork Installation / Basic IP Setup with IP-FINDER Network Installation / Browser Setup Active X Installation AT First Time LoginPage After successful login the main screen appears Main Operation ScreenSystem Settings Basic SettingSetup Screen Syslogd Service System LogVideo / Image VideoPreProc Display Text SensorBackground color Date Time PositionAGC Audio PTZ Driver Manager DeletePTZ Driver Upload Serial port settingsPort mode PortMaximum number of simultaneous User setting Anonymous loginAdd / Modify / Delete User ViewersEvent Setting Live View Record File Path System Setting Video SettingAudio Setting Date / Time User Setting Network Dhcp NetworkNetwork DNS1 / DNS2Http ServicesStreaming RtspPPPoE Ddns DdnsUPnP Traversal Active UPnP Setting ActiveUPnP Port rangeFirewall settings To activate the UPnP function in Windows OSSmtp Enable enable Smtp authentificationSmtp Samba SambaNotification Notification SettingIf activated, enter access data to the FTP server If activated, enter email address Email subjectMulticast Multicast SettingSimilar setting procedure for both modes MPEG-4 / M-JPEGDate / Time NTPEnd time Switch fromIP Filtering Event Settings Application SettingEvent Add / Modify EventOn boot Event Setting NameTrigger by Alarm input Active alarm outSend NAP Go to presetSend TCP LocationTrigger Event Server Detect level Motion detection Setting Area 1 ~Motion Detection Area3Firmware Upgrade Factory Default Reboot Main Screen Controls General and Video SettingsOperation Control item Function Language selectionEvent Alerts Alternative PTZ mode by mouse PAN / Tilt / ZoomRecord / Snapshot Setting Manual Record Manual SnapshotListen Full Screen ModeAudio SpeakAttachment a Alarm Interface Circuit EverFocus Electronics Corp