EverFocus EAN-1350 manual Network, Dhcp, DNS1 / DNS2

Page 31

5.7 NETWORK

5.7.1 Network

IP - Assignment

 

DHCP

OFF: Fixed IP address

 

ON: IP-address assignment provided by DHCP (requires DHCP

 

support in the network)

IP-Address

In the mode DHCP ON: display of IP - Address,

 

in mode DHCP OFF: manual entering of the cameras IP adress

 

(alternative to the setting by the "IP-Finder" application)

Subnet mask

Display of Subnet mask setting, in mode "DHCP Off" possibility

 

to change setting

 

(alternative to the setting by the "IP-Finder" application)

Gateway

Enter the IP - Address of the Gateway of connected network

DNS1 / DNS2

Enter the IP - address of the DNS1 (Dynamic Name Server) and

 

DNS2 (if available)

MAC - Address

Display of the camera´s MAC - Address (not editable)

Image 31
Contents EAN-1350 Weee Safety warningsTable of Contents Event Server Introduction FeaturesDelivery Scope System Requirements SpecificationsSoftware Software Features / FunctionsAudio CommunicationBackpanel Connectors Hardware InstallationPage Lens Mounting Camera Mounting Video Installation for Camera / Lens AdjustmentTerminal pin assignment Alarm IN- / OUT InstallationAlarm Inputs Installation of dry N.O. contact with camera power sourceInstallation with dry N.O. contact using external DC voltage Alarm OutputRS-485 Telemetry Installation Audio InstallationPower Input Connection Network Installation / WiringNetwork Installation / Basic IP Setup with IP-FINDER IP- SetupNetwork Installation / Router Settings Active X Installation AT First Time Login Network Installation / Browser SetupPage Main Operation Screen After successful login the main screen appearsSetup Screen Settings Basic SettingSystem System Log Syslogd ServiceVideo Video / ImagePreProc Date Time Position SensorBackground color Display TextAGC Audio Delete PTZ Driver ManagerPort Serial port settingsPort mode PTZ Driver UploadViewers User setting Anonymous loginAdd / Modify / Delete User Maximum number of simultaneousAudio Setting Date / Time User Setting Network Live View Record File Path System Setting Video SettingEvent Setting DNS1 / DNS2 NetworkNetwork DhcpRtsp ServicesStreaming HttpPPPoE Ddns DdnsPort range UPnP Setting ActiveUPnP UPnP Traversal ActiveTo activate the UPnP function in Windows OS Firewall settingsSmtp Enable enable Smtp authentificationSmtp Samba SambaIf activated, enter email address Email subject Notification SettingIf activated, enter access data to the FTP server NotificationMPEG-4 / M-JPEG Multicast SettingSimilar setting procedure for both modes MulticastNTP Date / TimeIP Filtering Switch fromEnd time Add / Modify Event Settings Application SettingEvent EventActive alarm out Event Setting NameTrigger by Alarm input On bootLocation Go to presetSend TCP Send NAPTrigger Event Server Area3 Motion detection Setting Area 1 ~Motion Detection Detect levelFirmware Upgrade Factory Default Reboot Control item Function Language selection General and Video SettingsOperation Main Screen ControlsEvent Alerts PAN / Tilt / Zoom Alternative PTZ mode by mouseRecord / Snapshot Setting Manual Snapshot Manual RecordSpeak Full Screen ModeAudio ListenAttachment a Alarm Interface Circuit EverFocus Electronics Corp