2.Repeatedly press MENU (13) until the blinking “date format” of your choice appears on the LCD panel (9).
•The blinking “E” indicates there is no film in the camera.
3.Press ENTER (14) to set the format.
•If the camera is already at this format, you can bypass this step.
4.Press SELECT (18) to actuate the setting for month.
5.Repeatedly press and/or hold SELECT to select the new number for month.
6.Press ENTER (14) to set the month and to actuate the setting for day.
•Press ENTER again if you want to end the selection.
7.Follow steps 4 and 5 to finish setting the date.
Setting the time (hour/minutes)
The camera has a
1.Completely lift up the Lens cover/
flash (2) to raise the flash and to turn on the camera.
6