Kodak Auto-Focus Camera Infinity focus, Flash/warning-lamp signals, Lamp Indicator Situation

Infinity focus

Capture sharp, distant scenery when you take pictures outdoors during the day or through windows.

Selecting the flash and picture-taking options

1.Completely lift up the Lens cover/ flash (2) to raise the flash and to turn on the camera.

2.Keep the subject within the distance range for the speed of film in your camera (see Flash-to-subject distance table on page 17).

•Don’t take pictures beyond the maximum distance or your pictures will be dark.

3.Repeatedly press MODES (20) until the Mode-selector arrow (26) points to the Auto-flash indicator (23), Fill-flash indicator (24) or Flash-off indicator (25), or until the Infinity-focus indicator (28) or Nightview indicator (29) appears on the LCD panel (9).

16

4.Frame your subject within the Viewfinder eyepiece (11).

5.Partially press down the Shutter button (1). When the Flash/camera- ready lamp (10) glows green, fully press down the shutter button to take the picture.

The flash, infinity-focus, and nightview modes remain selected after you take the picture. To cancel the selection, press MODES to select another setting or close and reopen the lens cover/flash to automatically return to the

default setting.

Flash/warning-lamp signals

Lamp Indicator	Situation
Glows green	• Flash fully charged
Glows red*	• Subject closer than
	1.3 ft (0.4 m)
“Blinks” red*	• Flash not
	fully charged
	• Camera movement

*See the TROUBLESHOOTING table for more information.