Operating Instructions
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1 or Host Name*2, Login ID*2 and Password*2.
From (Reply)*3: Enter the
To *3: Enter the
Subject & Text *4: Sets the subject and text of the
Notes
•Set POP3 server address or Host Name, Login ID and Password if you need POP authentication to send the
•Network Camera will only operate correctly with SMTP (Simple Mail Transfer Protocol) server. It is not available with Internet- accessed mail servers like "Hotmail®" or other mail accounts accessed via web browser.
c.Selects [No Message] or [Mail]
Mail: Only the notification
*1 Refer to IP addressing on page 93.
*2 Refer to unavailable character set 1 on page 93. *3 Refer to unavailable character set 2 on page 93.
*4 Only ["] is unavailable in the ASCII character table on page 93 and refer to displayable character set on page 94.
2.Select/Enter the each parameter. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters.
•Click [Clear Buffered images] to clear the buffered image. [Clear Buffered images] does not save the parameters.
[For assistance, please call: | 67 |