Date and Time Display
Install the Clock Lithium Cell
1.Make sure camcorder is turned off, and remove any power supply attached to the camcorder.
2.Pull out the cell holder.
3.Insert the clock cell into the cell holder with the “+” terminal facing out.
Lithium Cell Battery
Cell Holder
4.Place the cell holder into the camcorder.
Note: Remove the battery from the camcorder if it will not be used for a month or more. This will prevent possible damage from battery leakage. If leakage occurs, wipe up the liquid inside the compartment and replace the battery.
Cautions: Lithium cell battery. Must be disposed of properly. Never handle a punctured or leaking cell. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed. If swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or chemical burn if mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the + and – sides of the cell.
28