RCA PRO846 manual To Synchro Edit

Synchro Edit

REW	F.FWD	F.FWD
REW Button		Button
STOP	PLAY
STOP Button		PLAY Button
A/V DUB	PAUSE
DISPLAY RECORD		PAUSE/
		RECORD
	T
		Button
RESET	ZOOM
	W
TITLE	S.EDIT
ON		S.(Synchro) EDIT
OFF

Button

To Synchro Edit

1.Connect your camcorder to a compatible VCR as shown.

2.Prepare the camcorder to play back the tape you want to copy.

•Slide the CAM/OFF/VCR switch to VCR.

•Insert the tape you want to copy.

•Press PLAY.

•Press the thumb trigger (PAUSE/ RECORD on remote) to place the camcorder in play pause.

3.Prepare the VCR to record.

•Turn on the VCR.

•Insert a blank tape into VCR.

•Press RECORD to put VCR in record pause.

Note: If the VCR begins to record instead of pausing – stop the VCR, change the compatibility switch on the AVS80 cable, and press RECORD on the VCR again.

4.Press S.EDIT on the remote to start the camcorder playing and the VCR recording.

Note: Pressing S.EDIT puts the camcorder in review for several seconds and then into playback.

5.Pressing REW, F.FWD, STOP, or thumb trigger (PAUSE/RECORD on remote) automatically puts the VCR into record pause. This allows you to search (forward or backward) or fast- forward or rewind the tape in the camcorder without disturbing the tape in the VCR.

•To search forward (or backward), press F.F (F.FWD on remote) or REW. Press PLAY to resume normal playback. To begin copying again, press the thumb trigger (PAUSE/ RECORD on remote) and then press S.EDIT on remote.

•To fast-forward or rewind the tape, press STOP then F.F (F.FWD on remote) or REW. To begin copying again, press STOP, then PLAY, then the thumb trigger (PAUSE/RECORD on remote). Then press S.EDIT on remote to begin copying.

6.If you want to stop copying the tape at a certain point, turn on the camcorder’s memory-stop feature, and set the camcorder’s time counter to “0:00:00M” at the point on the tape where you want to stop copying. When the camcorder reaches “0:00:00M” on the tape, it will automatically place the VCR in record pause.

41