Playback on TV without Audio/Video Inputs
To connect your camcorder to a TV without audio and video inputs, you need an optional RF output adapter, such as CRF81 shown on page 57.
VHF
Back of TV
VHF
VHF Antenna
1OR
VHF Antenna
| F | FOCUS |
|
|
|
| |
|
| N |
|
|
|
| DATE/TITLE |
|
| PLAY |
|
| REW |
| DISPLAY |
| EDIT |
| |
|
| F.F. | |
|
| SEARCH | |
|
|
| |
|
| STOP | |
2 |
|
|
|
OR | Audio/Video In/Out |
| |
|
| ||
| Connector |
|
|
| (Located behind |
|
|
| small cover) |
|
|
Optional 75/300 ohm |
|
| 3 |
Transformer |
|
|
(such as AH011)
| 2 |
| CH3/CH4 |
OR | Switch |
RF Output
Optional 300/75 ohm Adapter
Transformer(optional) (such as 193983)
Installation
1Disconnect the VHF antenna from your TV. Connect the antenna to the ANT IN connector on the RF output adapter if you leave the adapter connected to the TV.
Note: If your VHF antenna is the flat
2Attach the RF output adapter’s cable to the VHF input on your TV.
Note: If your TV has 300 ohm VHF screw terminals, you will need an optional
3Attach the RF output adapter’s plug to the audio/video in/out connector under the small cover on the side of the camcorder.
52