Cenix Digicom 67980 manual Capturing a Photo

Page 24

Operation Instructions

On Screen Navigation

7)Capturing a Photo

When in the live screen, make sure the camera icon is present at the top left portion of the screen. (Fig. 13) Press the OK button to capture a photo. The image is saved to the internal memory or SD card. The total number of photos is displayed below the camera icon. The number will increase or decrease as different capacity SD cards are used, or the photo quality is adjusted.

Fig. 13

8)Capturing a Video

While in the live screen, make sure the video icon is present at the top left portion of the screen. (Fig. 14) Press the OK button to start capturing video. A record icon will appear at the top right portion of the screen, just below battery capacity icon. This shows that video is capturing. The time at the top left portion, just below video icon will begin counting down. This indicates how much video you can store in the internal memory or SD card. Press the OK button again to stop capturing a video.

Fig. 14

If you wish to record sound, you can insert the optional earphone with mic into the earphone port of the tool. When capturing a

22

Image 24
Contents Page Table of Contents Safety Instructions Work Area SafetyElectrical Safety Personal Safety Description, Specifications and Tool Components SpecificationsDescription Accessories Included Tool Components Buttons and Ports Installation and Connection Installation and Connection Imager Head and Cable InstallationAccessories Installation SD Card Installation USB Cable ConnectionVideo-Out Cable Connection Earphone ConnectionBattery Charging Precautions Battery Charging SafetyBattery and Charger Specifications Battery Charging Procedures Charger InspectionBattery Charging Procedures Operation Instructions Basic OperationOperation Precautions Tool Inspection Tool and Work Area Set-Up Operation Instructions On Screen Navigation Splash ScreenZooming Capturing a Photo Playing Back and Deleting Captured Photos and Videos Operation Instructions Entering the Secondary Settings Screen Operation Instructions Icons  Advanced Settings is the default mode from the Setup menu Operation Instructions  If you select Yes, a message Warning this will erase ALL Operation Instructions  Select Restore Defaults from Advanced Settings and press OK button  English is the default language Troubleshooting Symptoms Possible Solutions ReasonsParts List and Diagram Item # DescriptionParts List and Diagram