Safety Instructions | Work Area Safety |
1. Safety Instructions
IMPORTANT: To prevent electric shock, fire and/or personal injury or damage, read this user’s manual first and observe the following safety instructions.
1.1Work Area Safety
Always perform automotive testing in a safe environment.
Keep your work area clean and well lit. Cluttered benches and dark areas may cause accidents.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
Operate the tool in a
Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
Do not use the tool around corrosive chemicals which can ruin the photo quality.
Keep bystanders, children and visitors away while operating the tool.
Keep the tool dry, clean, free from oil, water and grease. Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
1.2Electrical Safety
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
Do not expose the tool to rain or wet conditions. Water entering the tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the tool. Keep cord away from heat, oil, sharp edges or moving parts.
If operating the tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) to protect supply.
1