Cenix Digicom 67980 manual Battery Charging Procedures

Battery Charging Precautions Battery Charging Procedures

Fig. 8

There are two means of charging battery:

1)To charge the battery with the charger: Locate the DC power source port of the tool. With dry hands, connect the tool to the charger and plug in the charger to start charging.

2)To charge battery by USB cable: Locate the USB port of the tool. With dry hands, connect the tool to a PC with the USB cable to start charging.

The battery will begin charging automatically. While the battery is charging, the charging indicator light is red.

When the battery is fully charged, the charging indicator light turns green.

Once the battery is charged, it may remain until it is ready to be used. There is no risk of over-charging the battery. When the battery has been fully charged, the charger automatically switches to retention charging.

Unplug the charger from outlet once charging completes.

14