Operation Instructions, Basic Operation

Operation Instructions

Basic Operation

5. Operation Instructions

IMPORTANT: Always wear safety eye protection to protect your eyes against dirt and other objects. Follow the operation instructions to reduce the risk of injury from electric shock, entanglement and other causes.

5.1 Basic Operation

NOTE: When in operation, the cable can be bent into a specific shape. This may help to maneuver the cable into confined areas.

1)Hold the tool with the LCD screen facing you and press the Power button to turn it on. Wait for several seconds. While the unit is booting up an introductory screen is displayed. Then the live screen is displayed, where you can do most of your work.

2)Press the OK button to capture photos in the camera mode. Press the OK button to begin capturing videos in the video mode. Press the Camera/Video button to switch between the two modes.

3)Press the UP and DOWN arrow buttons to zoom in or out. A zoom indicator bar is displayed as you make the adjustment.

4)Press the LEFT and RIGHT arrow buttons to increase or decrease the LED brightness while in the camera mode. A brightness indicator bar is displayed as you adjust LED light intensity.

5)Press the Play button to view captured photos and videos.

6)Press the Trash Can button to delete captured photos and videos as needed when playing back captured photos and videos.

7)Press the Reverse button to control the direction of the real-time image and video as needed in the live screen.

8)Press the Setting/Back button to enter Setup mode or return to the last viewed screen.

9)Use the supplied accessories to provide application flexibility.

10)Use the supplied USB cable to connect the tool to a PC to upload and view captured photos and videos.

11)Connect the supplied video-out cable to the video-out port of the tool and the other end of the cable to the video-in port of a TV to view a high quality real-time image.