TRENDnet TV-IP252P manual Features and Benefits, MPEG4/MJPEG Dual-codec Supported, Supports Rtsp

Page 10

1.3 Features and Benefits

zMPEG4/MJPEG Dual-codec Supported

The camera provides you with excellent images by the MPEG4/MJPEG dual-codec selectable technology, allowing you to adjust image size and quality, and bit rate according to the networking environment.

zFlexible Audio Capability

The camera allows you to connect the external microphone to receive on-the-spot audio via the Internet, allowing you to monitor the on-site voice. In addition, you can connect an external active speaker to the camera to speak through the camera (supporting mono audio only).

zSupports RTSP

The camera supports RTSP (Real Time Streaming Protocol), which is a technology that allows you to view streaming media via the network. You can view the real- time video with the Quick Time player or RealPlayer. To view the real-time streaming image on your computer, open the Web browser and enter the RTSP link:

rtsp://(IP address of the camera)/mpeg4.

zRemote Control Supported

By using a standard Web browser or the bundled Ultra View software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network.

- 9 -

Image 10

Contents Page Preface Page Contents Chapter Appendix Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Connectors„ Physical Components Connecting Cables Link & Power switches LED indicators„ Inside Components MPEG4/MJPEG Dual-codec Supported Features and BenefitsRemote Control Supported Flexible Audio CapabilityMultiple Profiles Supported O Connectors SupportedMultiple Platforms Supported Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera „ Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationCamera Setting Using Smart WizardIP Setting Email Settings Confirm Settings Basic Setup „ Basic System„ Basic Date & Time „ Basic User General User GuestNetwork Settings „ Network Network DNS „ Network IP Filter Ports NumberPage Page Setting up Video & Audio „ Video & Audio Camera„ Video & Audio Video Image SettingMPEG4 Mjpeg „ Video & Audio Audio „ Video & Audio Text OverlayPage Event Server Configuration „ Event Server Setting FTPFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect Event Config „ Event Configuration General Setting„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page „ Information Device Info Information„ Information System Log Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video Manually recordTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification Audio Input ResetUser Interface OutputGlossary of Terms NumbersBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105