TRENDnet SecurView PoE Dome Internet Camera, TV-IP252P manual Network Storage

Page 51

zNetwork Storage

-Samba Server Address: Enter the IP address of the Network Storage server.

-Share: Assign the folder on the Network Storage server to share the files to users.

-Path: Assign the path for uploading the files on the Network Storage server. For example, /Test/.

-User Name: Enter the user name to login into the Network Storage server.

-Password: Enter the password to login into the Network Storage server.

-Split By: When the file is too large to upload smoothly, use this option to split it by selecting File Size or Recording Time.

-When Disk Full: Select Stop Recording or Recycle – Delete Oldest Folder when the storage space on the Network Storage server is full.

NOTE If you have enabled Recording to Storage feature, after the camera boots up completely, it will mount to the storage server. If the storage server is not available at the time, the camera will remount every 5 minutes for an hour (12 times) and then stop remounting.

- 50 -

Image 51

Contents Page Preface Page Contents Chapter Appendix Chapter Introduction to Your Camera Checking the Package ContentsConnectors Getting to Know Your Camera„ Physical Components Connecting Cables LED indicators Link & Power switches„ Inside Components Flexible Audio Capability Features and BenefitsRemote Control Supported MPEG4/MJPEG Dual-codec SupportedMultiple Applications Supported O Connectors SupportedMultiple Platforms Supported Multiple Profiles SupportedSystem Requirement Cameras within Your Network Applications of the Camera„ Basic Installation Surface Installing the CameraInstall the camera to the ceiling with three screws Page Page Using IPSetup Accessing the CameraPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraUsing Smart Wizard Camera SettingIP Setting Email Settings Confirm Settings „ Basic System Basic Setup„ Basic Date & Time „ Basic User Guest General UserNetwork Settings „ Network Network DNS Ports Number „ Network IP FilterPage Page „ Video & Audio Camera Setting up Video & AudioImage Setting „ Video & Audio VideoMPEG4 Mjpeg „ Video & Audio Text Overlay „ Video & Audio AudioPage „ Event Server Setting FTP Event Server ConfigurationFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect „ Event Configuration General Setting Event Config„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page Information „ Information Device Info„ Information System Log Logs table displays the events log recorded by the system Securview Software InstallationPage Page Page Page Using Installation „ Controls Panel Item Features„ View Selection Panel „ Camera Panel „ Video View Window and Camera List Video Viewing „ System PanelClick Add New Camera To add a cameraPage Page To remove a camera To link to the Web page of the camera Manually record To Record VideoTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Other AccountInformation Specification Output ResetUser Interface Audio InputNumbers Glossary of TermsBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105