TRENDnet TV-IP252P, SecurView PoE Dome Internet Camera manual

Page 60

resume the original settings, you can restore them by retrieving the backup file.

-Backup: Click Get the backup file to save the current configuration of the camera.

-Restore: Click Browse to locate the backup file and then click Restore.

zUpdate Firmware: You can upgrade the firmware for your camera once you obtained a latest version of firmware.

-Current Firmware Version: This item displays the current firmware version.

-Select the firmware: Click Browse to locate the backup file and then click Update.

WARNING: Firmware upgrade failure may permanently damage the unit and cause it to malfunction. Do not interrupt the firmware upgrade process by disconnecting it from the network or unplugging its power from the power outlet once the firmware upgrade process has begun. Never perform a firmware upgrade over wireless connections or via remote access connections.

- 59 -

Image 60

Contents Page Preface Page Contents Chapter Appendix Checking the Package Contents Chapter Introduction to Your CameraConnectors Getting to Know Your Camera„ Physical Components Connecting Cables LED indicators Link & Power switches„ Inside Components Features and Benefits Remote Control SupportedMPEG4/MJPEG Dual-codec Supported Flexible Audio CapabilityO Connectors Supported Multiple Platforms SupportedMultiple Profiles Supported Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera „ Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationUsing Smart Wizard Camera SettingIP Setting Email Settings Confirm Settings Basic Setup „ Basic System„ Basic Date & Time „ Basic User General User GuestNetwork Settings „ Network Network DNS „ Network IP Filter Ports NumberPage Page Setting up Video & Audio „ Video & Audio CameraImage Setting „ Video & Audio VideoMPEG4 Mjpeg „ Video & Audio Audio „ Video & Audio Text OverlayPage Event Server Configuration „ Event Server Setting FTPFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect Event Config „ Event Configuration General Setting„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page Information „ Information Device Info„ Information System Log Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video Manually recordTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification Reset User InterfaceAudio Input OutputGlossary of Terms NumbersBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105