TRENDnet SecurView PoE Dome Internet Camera, TV-IP252P manual Configuring the IP Address of the PC

Page 27

3.3 Configuring the IP Address of the PC

If you have failed to access the camera, please check the IP address of your computer. When you connect the camera to your computer directly, proceed with configuration of the camera. You need to set up the IP addresses to be in the same segment for the two devices to communicate.

1.On your computer, click Start > Control Panel to open the Control Panel window.

2.Double-click Network Connection to open the Network Connection window.

3.Right-click Local Area Connection and then click Properties from the shortcut menu.

4.When the Local Area Connection Properties window appears, select the General tab.

5.Select Internet Protocol [TCP/IP] and then click Properties to bring up the Internet Protocol [TCP/IP] Properties window.

6.To configure a fixed IP address that is within the segment of the camera, select the Use the following IP address option. Then, enter an IP address into the empty field. The suggested IP address is 192.168.10.x (x is 1~254 except 30), and the suggested Subnet mask is 255.255.255.0.

7.When you are finished, click OK.

- 26 -

Image 27

Contents Page Preface Page Contents Chapter Appendix Chapter Introduction to Your Camera Checking the Package ContentsConnectors Getting to Know Your Camera„ Physical Components Connecting Cables LED indicators Link & Power switches„ Inside Components Flexible Audio Capability Features and BenefitsRemote Control Supported MPEG4/MJPEG Dual-codec SupportedMultiple Applications Supported O Connectors SupportedMultiple Platforms Supported Multiple Profiles SupportedSystem Requirement Cameras within Your Network Applications of the Camera„ Basic Installation Surface Installing the CameraInstall the camera to the ceiling with three screws Page Page Using IPSetup Accessing the CameraPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraUsing Smart Wizard Camera SettingIP Setting Email Settings Confirm Settings „ Basic System Basic Setup„ Basic Date & Time „ Basic User Guest General UserNetwork Settings „ Network Network DNS Ports Number „ Network IP FilterPage Page „ Video & Audio Camera Setting up Video & AudioImage Setting „ Video & Audio VideoMPEG4 Mjpeg „ Video & Audio Text Overlay „ Video & Audio AudioPage „ Event Server Setting FTP Event Server ConfigurationFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect „ Event Configuration General Setting Event Config„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page Information „ Information Device Info„ Information System Log Logs table displays the events log recorded by the system Securview Software InstallationPage Page Page Page Using Installation „ Controls Panel Item Features„ View Selection Panel „ Camera Panel „ Video View Window and Camera List Video Viewing „ System PanelClick Add New Camera To add a cameraPage Page To remove a camera To link to the Web page of the camera Manually record To Record VideoTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Other AccountInformation Specification Output ResetUser Interface Audio InputNumbers Glossary of TermsBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105