TRENDnet SecurView PoE Dome Internet Camera, TV-IP252P manual Network IP Filter, Ports Number

Page 39

3.Enter the required information in the Host Name, User Name, and Password boxes.

NOTE You have to sign up for DDNS service with the service provider before configuring this feature.

zUPnP: The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the device-to-device interoperability. In addition, it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall.

Select the Enable option to enable this feature.

zPorts Number

-HTTP Port: The default HTTP port is 80.

-RTSP Port: Configure the transmission of streaming data within the network. The default RTSP (Real Time Streaming Protocol) port is 554.

NOTE If the camera is behind a NAT router or firewall, the suggested ports to be used are from 1024 to 65535.

Network >> IP Filter

- 38 -

Image 39

Contents Page Preface Page Contents Chapter Appendix Chapter Introduction to Your Camera Checking the Package ContentsConnectors Getting to Know Your Camera„ Physical Components Connecting Cables LED indicators Link & Power switches„ Inside Components Flexible Audio Capability Features and BenefitsRemote Control Supported MPEG4/MJPEG Dual-codec SupportedMultiple Applications Supported O Connectors SupportedMultiple Platforms Supported Multiple Profiles SupportedSystem Requirement Cameras within Your Network Applications of the Camera„ Basic Installation Surface Installing the CameraInstall the camera to the ceiling with three screws Page Page Using IPSetup Accessing the CameraPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraUsing Smart Wizard Camera SettingIP Setting Email Settings Confirm Settings „ Basic System Basic Setup„ Basic Date & Time „ Basic User Guest General UserNetwork Settings „ Network Network DNS Ports Number „ Network IP FilterPage Page „ Video & Audio Camera Setting up Video & AudioImage Setting „ Video & Audio VideoMPEG4 Mjpeg „ Video & Audio Text Overlay „ Video & Audio AudioPage „ Event Server Setting FTP Event Server ConfigurationFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect „ Event Configuration General Setting Event Config„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page Information „ Information Device Info„ Information System Log Logs table displays the events log recorded by the system Securview Software InstallationPage Page Page Page Using Installation „ Controls Panel Item Features„ View Selection Panel „ Camera Panel „ Video View Window and Camera List Video Viewing „ System PanelClick Add New Camera To add a cameraPage Page To remove a camera To link to the Web page of the camera Manually record To Record VideoTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Other AccountInformation Specification Output ResetUser Interface Audio InputNumbers Glossary of TermsBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105