TRENDnet TV-IP252P manual Click Tools Internet Options Click Security

Page 26

zSnapshot allows you to capture and save a still image.

zBrowse allows you to assign the destination folder to store the video clips and still images.

zTalk allows you to speak out through the camera. Please note only one user is allowed to use this function at a time.

zListen allows you to receive the on-site sound and voice from the camera.

zTrigger Out allows you to trigger on/off the GPIO output manually.

Live View Image: Displays the real-time image of the connected camera.

Zoom In Buttons: Click the buttons to zoom in the live view image by 1x, 2x, and 3x.

Camera Information: Displays the camera’s location and the current date & time. The information can be modified in the Web Configuration.

NOTE If your PC uses Microsoft Vista platform you may not be able to find these recorded files that are stored by Snapshot or Manual Record. If this is the case, you will need to disable the protected mode of Security in the IE Browser through the following steps:

1.Open the Internet Explorer browser.

2.Click Tools > Internet Options.

3.Click Security.

4.Disable the Enable Protected Mode option and then click OK.

- 25 -

Image 26

Contents Page Preface Page Contents Chapter Appendix Checking the Package Contents Chapter Introduction to Your Camera„ Physical Components ConnectorsGetting to Know Your Camera Connecting Cables „ Inside Components LED indicatorsLink & Power switches MPEG4/MJPEG Dual-codec Supported Features and BenefitsRemote Control Supported Flexible Audio CapabilityMultiple Profiles Supported O Connectors SupportedMultiple Platforms Supported Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera „ Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationIP Setting Using Smart WizardCamera Setting Email Settings Confirm Settings Basic Setup „ Basic System„ Basic Date & Time „ Basic User General User GuestNetwork Settings „ Network Network DNS „ Network IP Filter Ports NumberPage Page Setting up Video & Audio „ Video & Audio CameraMPEG4 Image Setting„ Video & Audio Video Mjpeg „ Video & Audio Audio „ Video & Audio Text OverlayPage Event Server Configuration „ Event Server Setting FTPFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect Event Config „ Event Configuration General Setting„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page „ Information System Log Information„ Information Device Info Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video Manually recordTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification Audio Input ResetUser Interface OutputGlossary of Terms NumbersBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105