TRENDnet SecurView PoE Dome Internet Camera, TV-IP252P manual

Page 41

For example, when you enter 192.168.10.50 in Start IP Address and 192.168.10.80 in End IP Address, the user whose IP address located within 192.168.10.50

~ 192.168.10.80 will not be allowed to access the camera.

-Accept IP List: The list displays the range setting(s) of IP addresses that are allowed to access the camera. To clear the setting, select a range of IP addresses from the list and click Delete.

zDeny

-Start/End IP Address: Assign a range of IP addresses that are blocked to access the camera by entering the Start IP address and End IP address options. When you are finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.

For example, when you enter 192.168.10.50 in Start IP Address and 192.168.10.80 in End IP Address, the user whose IP address located within 192.168.10.50 ~ 192.168.0.80 will not be allowed to access the camera.

-Deny IP List: The list displays the range setting(s) of IP addresses that are blocked to access the camera. To clear the setting, select a range of IP addresses from the list and click Delete.

- 40 -

Image 41

Contents Page Preface Page Contents Chapter Appendix Chapter Introduction to Your Camera Checking the Package Contents„ Physical Components ConnectorsGetting to Know Your Camera Connecting Cables „ Inside Components LED indicatorsLink & Power switches Remote Control Supported Features and BenefitsMPEG4/MJPEG Dual-codec Supported Flexible Audio CapabilityMultiple Platforms Supported O Connectors SupportedMultiple Profiles Supported Multiple Applications SupportedSystem Requirement Cameras within Your Network Applications of the Camera„ Basic Installation Surface Installing the CameraInstall the camera to the ceiling with three screws Page Page Using IPSetup Accessing the CameraPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraIP Setting Using Smart WizardCamera Setting Email Settings Confirm Settings „ Basic System Basic Setup„ Basic Date & Time „ Basic User Guest General UserNetwork Settings „ Network Network DNS Ports Number „ Network IP FilterPage Page „ Video & Audio Camera Setting up Video & AudioMPEG4 Image Setting„ Video & Audio Video Mjpeg „ Video & Audio Text Overlay „ Video & Audio AudioPage „ Event Server Setting FTP Event Server ConfigurationFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect „ Event Configuration General Setting Event Config„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page „ Information System Log Information„ Information Device Info Logs table displays the events log recorded by the system Securview Software InstallationPage Page Page Page Using Installation „ Controls Panel Item Features„ View Selection Panel „ Camera Panel „ Video View Window and Camera List Video Viewing „ System PanelClick Add New Camera To add a cameraPage Page To remove a camera To link to the Web page of the camera Manually record To Record VideoTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Other AccountInformation Specification User Interface ResetAudio Input OutputNumbers Glossary of TermsBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105