TRENDnet TV-IP252P, SecurView PoE Dome Internet Camera manual

Page 16

4.Make connections according to your needs (refer to the illustration of connecting cables on page 6).

5.Pan/tilt the camera lens to a proper position by using the adjustable base, and adjust the lens focus by turning the lens ring slowly in either clockwise or anti-clockwise direction.

NOTE You can review the image quality from the Web browser when you complete the installation. If the image quality is poor, you have to disassemble the Dome cover to adjust the lens focus until the desired image appears clearly.

6.Replace the Dome cover and secure with four screws.

- 15 -

Image 16

Contents Page Preface Page Contents Chapter Appendix Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Connectors„ Physical Components Connecting Cables Link & Power switches LED indicators„ Inside Components Features and Benefits Remote Control SupportedMPEG4/MJPEG Dual-codec Supported Flexible Audio CapabilityO Connectors Supported Multiple Platforms SupportedMultiple Profiles Supported Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera „ Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationCamera Setting Using Smart WizardIP Setting Email Settings Confirm Settings Basic Setup „ Basic System„ Basic Date & Time „ Basic User General User GuestNetwork Settings „ Network Network DNS „ Network IP Filter Ports NumberPage Page Setting up Video & Audio „ Video & Audio Camera„ Video & Audio Video Image SettingMPEG4 Mjpeg „ Video & Audio Audio „ Video & Audio Text OverlayPage Event Server Configuration „ Event Server Setting FTPFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect Event Config „ Event Configuration General Setting„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page „ Information Device Info Information„ Information System Log Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video Manually recordTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification Reset User InterfaceAudio Input OutputGlossary of Terms NumbersBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105