TRENDnet TV-IP252P, SecurView PoE Dome Internet Camera manual Dns

Page 38

assigned an IP address from the DHCP server automatically.

-Static IP: Select this option to assign the IP address for the camera directly. You can use IPSetup to obtain the related setting values.

IP	Enter the IP address of the camera. The
	default setting is 192.168.10.30.

Subnet	Enter the Subnet Mask of the camera.
Mask	The default setting is 255.255.255.0.
Default	Enter the Default Gateway of the camera.
Gateway	The default setting is 192.168.10.1.
Primary/	DNS (Domain Name System) translates
Secondary	domain names into IP addresses. Enter
DNS	the Primary DNS and Secondary DNS
	that are provided by ISP.

-PPPoE: Select this option when you use a direct connection via the ADSL modem. You should have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP address from the ISP as starting up.

NOTE Once the camera receives an IP address from the ISP after starting up, it automatically sends a notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.

zDDNS Setting: With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet IP address. To set up the DDNS:

1.Select the Enable option to enable this feature.

2.Select the Provider from the pull-down list.

-37 -

Image 38

Contents Page Preface Page Contents Chapter Appendix Checking the Package Contents Chapter Introduction to Your Camera„ Physical Components ConnectorsGetting to Know Your Camera Connecting Cables „ Inside Components LED indicatorsLink & Power switches MPEG4/MJPEG Dual-codec Supported Features and BenefitsRemote Control Supported Flexible Audio CapabilityMultiple Profiles Supported O Connectors SupportedMultiple Platforms Supported Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera „ Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display Area Accessing to the Camera Enter the User name and Password „ Live View/Setup Switch Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationIP Setting Using Smart WizardCamera Setting Email Settings Confirm Settings Basic Setup „ Basic System„ Basic Date & Time „ Basic User General User GuestNetwork Settings „ Network Network DNS „ Network IP Filter Ports NumberPage Page Setting up Video & Audio „ Video & Audio CameraMPEG4 Image Setting„ Video & Audio Video Mjpeg „ Video & Audio Audio „ Video & Audio Text OverlayPage Event Server Configuration „ Event Server Setting FTPFTP „ Event Server Setting Email „ Event Server Setting Network Storage Network Storage Motion Detect Event Config „ Event Configuration General Setting„ Event Configuration Arrange Schedule Profile „ Event Configuration Motion Detect Trigger „ Event Configuration Schedule Trigger „ Event Configuration Gpio Trigger Page Tools Page „ Information System Log Information„ Information Device Info Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video Manually recordTrigger recording by motion detection Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification Audio Input ResetUser Interface OutputGlossary of Terms NumbersBootp Enterprise HEX ISP Mjpeg PCM Smtp TCP/IP 100 Limited Warranty 102 103 104 105