Functions 4.3 Fixed point
4.3.3Change fixed point position
Requirements
The cam is opened with SIMOTION CamTool.
Change fixed point position
To change the position of a fixed point:
1.Select the fixed point in the S diagram (distance diagram). The position of the fixed point shown in the tooltip.
2.Move the fixed point with drag&drop to the new position.
or
1.
2.Enter the new x- or
4.3.4Changing the velocity at the position of a fixed point:
Requirements
The cam is opened with SIMOTION CamTool.
Change velocity at fixed point
To change the velocity at the fixed point position:
1.The velocity at a fixed point position is represented by a handle in the V diagram (velocity diagram).
Select the handle. The mouse pointer shows the direction in which you can move the handle.
2.Move the handle with drag&drop to the new position.
or
1.
2.Enter the new velocity as specified in the following table in the Dynamic response tab and click OK. The handle in the V diagram (velocity diagram) is shown at the new position.
CamTool | |
Configuration Manual, 12.2004, |