Siemens 6AU1900-1AB32-0BA0 configurationmanual Limit values

Functions

4.8 Optimizing a Cam

Limit values

The limits of the interpolation curve for the transition are displayed here.

You can set the following parameters:

Table 4-3		Parameters in the Type tab (Interpolation Curve Properties window)
		Field/button	Explanation/instructions
Position
	Min		The minimum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is undershot, the minimum value is displayed with a
			red background.
	Max		The maximum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is exceeded, the maximum value is displayed with a
			red background.
Velocity
	Min		The minimum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is undershot, the minimum value is displayed with a
			red background.
	Max		The maximum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is exceeded, the maximum value is displayed with a
			red background.
Acceleration (v > 0)
	Min		The minimum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is undershot, the minimum value is displayed with a
			red background.
	Max		The maximum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is exceeded, the maximum value is displayed with a
			red background.
Acceleration (v < 0)
	Min		The minimum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is undershot, the minimum value is displayed with a
			red background.
	Max		The maximum value is displayed here as absolute value and as
			percentage value depending on the physical limit.
			If the physical limit is exceeded, the maximum value is displayed with a
			red background.

4-28	CamTool
	Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0