Functions
4.7 Interpolation point
Changing an Interpolation Point Position
To change the position of an interpolation point:
1.Select the interpolation point in the S diagram (distance diagram). The position of the interpolation point is shown in the tooltip.
2.Move the interpolation point with drag&drop to the new position.
or
1.
2.Enter the new position in the Position tab and click OK. The interpolation point is displayed at the new position.
Figure 4-17 Position tab
4.7.4Delete interpolation point
Requirements
The cam is opened with SIMOTION CamTool.
Delete interpolation point
To delete an interpolation point:
1.Select the interpolation point that you want to delete.
2.Press the DEL key. The interpolation point is deleted and the representation of the cam adjusted in all diagrams.
CamTool | |
Configuration Manual, 12.2004, |