Functions
4.5 Sine curve
2.Enter the new position in the Position tab and click OK. The sine curve is shown at the new position.
Figure 4-9 Position (Fx Sine Properties) tab
4.5.3Change sine curve definition range
Requirements
The cam is opened with SIMOTION CamTool.
Change sine curve definition range
To change the definition range of a sine curve:
1.Select the sine curve in the S diagram (distance diagram). The current position of the sine curve is shown in the tooltip.
2.The sine curve is shown with handles. The handles for the definition range are shown in green. Point to a green handle. The mouse pointer shows the direction in which you can move the handle.
3.Move the green handles with drag&drop to the new positions. While moving, the current value of the respective limit of the definition range is displayed in the tooltip.
Figure 4-10 Change sine curve definition range
CamTool | |
Configuration Manual, 12.2004, |