Siemens 6DS2-510-0xx00-0xa0 manual Parameter of configuration file SYSPAR.INI

Page 18

Product Information	February, 1999
BRIDGE CS-L2

6.4 Parameter of configuration file SYS_PAR.INI

The configuration file SYS_PAR.INI includes the parameter for inverting of the DIO- In/Outputs.

If the file SYS_PAR.INI is not present, the operation system uses the default settings from file SYS_PAR.DEF.

Parameter	DIO_MASKE_EIN=xxx		000: Inputs not negated
			255: Inputs negated
Parameter	DIO_MASKE_AUS=xxx		000: Outputs not negated
			255: Outputs negated
___________________________________________
# System parameters 10.05.96
[ID = 99999999		Note: Your Bridge serial number

#DIO settings all inputs and outputs inverted [DIO

DIO_MASKE_EIN =255 DIO_MASKE_AUS =255 [SCHL

S 0000 1111 2222 3333

#End

_______________________________________________________________________

Copyright © SIEMENS AG 1996-1999. All Rights Reserved.

S79220-A0978-A-05-7637

Page 18 of 20

Image 18

Contents Bridge CS-L2 VarScope Commissioning Startup by Commissioning TerminalBridge CS-L2 Esccopytm IBSBEDI.386 Update by Programming Device PG740 Removed Errors from V02.00 toRemoved Errors already with Extended Functions Installing the new M7 CPU Replacing the CP5412-A1 with an IF964-DP interface moduleSlot Module Interface Use for Configuration Box File Instructions on installing the CPU Limited operating performance Configuration of the bus connections L2AMPRO.INIParameter of configuration file BRSYS.INI Examples of standard system settingsL2hsa = Parameter of configuration file DOSCONF.DAT for CP5412-A1L2ts = L2ttr = Example of a configuration file DOSCONF.DAT # File for Installing TF/IHI DriverBRSYS.INI . If different addresses are entered, Example of a configuration file L2AMPRO.INI Parameter of configuration file SYSPAR.INI Diomaskeein =255 Diomaskeaus =255 SchlConnector Pin Assignment IF961-DIO Function Assignment of the OutputsFunction Assignment of the Inputs Status display and error messages Operational modes switch key switch