Update by Programming Device PG740 | Siemens 6DS2-510-0xx00-0xa0

Product Information	February, 1999
BRIDGE CS-L2

2.3.2 Update by Programming Device PG740

Before starting the UPDATE activities (pulling the memory card), please ensure that a current backup of any files that are to be modified exists. This will allow the previous software version to be restored in the even of unforeseen circumstances.

Switch off the BRIDGE CS-L2 before pulling the memory card!

Copy the files listed under 2.3.1 from the update diskette into a new directory having the 'name' of your PG740.

For the update, insert the memory card into the MEM-CARD slot of the PG740. Now copy all files from the directory 'name' onto the memory card (either using the file manager or explorer, or using a DOS box):

COPY name\*.* E: /y

Now perform the following two steps:

1)Plug the upgraded memory card of the Bridge back into the allocated BRIDGE CS-L2 and initiate a reboot of the BRIDGE CS-L2 (reset or off/on).

2)Install the new terminal program ASBEDIEN V1.06 to your PC from the second diskette included with your delivery (IBS tools).

3 Removed Errors (from V02.00 to V02.01)

F: Function concerned

A:Appearance

M:Modification

•F: Delay of telegram transport

A:Very sporadically within the Bridge it can happen, that telegrams were not passed

through immediatelly, but only when new telegrams were be added.

M:Immediate pass through of the received telegrams.

•F: Commissioning commands COPY_PC and COPY_TM

A:Both file transfer commands break off with error message.

M:Serial transmission corrected.

S79220-A0978-A-05-7637

Page 6 of 20