Samsung SHC-750 user manual Camera ID, Use the Left/Right buttons to change the current value

Page 12

Instruction: Camera Operation

Use the Up/Down buttons to select an item.

SETUP

 

CAMERA ID

OFF

BACKLIGHT

OFF

WHITE BAL.

ATW

MOTION DET.

OFF

LENS

DC

SHUTTER

MANUAL

AGC

HIGH

SENS-UP

OFF

SSNR

MIDDLE

SPECIAL

 

EXIT

 

Use the Left/Right buttons to change the item value.

3.Use the Left/Right buttons to change the current value.

Pressing the Left/Right buttons will display all possible values or modes in order. Keep pressing the button until the desired value or mode is displayed.

4.Select Exit and then press the Set button to exit.

Caution

The “ ” sign indicates that there is a further menu within the current mode; press the Set button to move to the menu following.

The “- - - ” sign indicates that the current mode cannot be used.

Camera ID

If an ID is assigned to a camera, it can be displayed on a monitor and that camera’s communication mode can be changed when communicating with external devices.

1.After the Setup menu is displayed on the monitor, press the Up/Down button to move the arrow until it is pointing to “Camera ID.”

2.Press the Left/Right button until the current status changes to “ON.”

COLOR CCD CAMERA 22 User’s Manual

Caution

If the current status is “OFF,” the camera ID will not be displayed on a monitor even if an ID is assigned.

3. Press the Set button.

4. A number from 0~255 may be assigned as a camera ID.

Move the ID number cursor left/right to select and assign an ID.

5. Once the ID is assigned, select a position for ID display.

Press the Set button from the Position menu.

SETUP

 

CAMERA ID

OFF

BACKLIGHT

OFF

WHITE BAL.

ATW

MOTION DET.

OFF

LENS

DC

SHUTTER

MANUAL

AGC

HIGH

SENS-UP

OFF

SSNR

MIDDLE

SPECIAL

 

EXIT

 

COLOR CCD CAMERA 23 User’s Manual

Image 12
Contents Ultimate Page Major Functions and Features Contents Precautions Heat or coldProduct Components Names and Functions of Each PartGroove for Tripod Mount Function ButtonsInstructions Setup Names and Functions of Each PartWhen using a C/CS-mount lens Using DC Power Instruction ConnectionMenu Functions Camera IDBacklight Motion DetCamera ID Use the Left/Right buttons to change the current valueSelect Exit and then press the Set button to exit Press the Set buttonBackLight White Bal Motion DetThis feature controls the brightness of the screen Lens SelectionShutter Select either auto or manual shutter controlAuto Gain Control Sens-UpYou can turn the Burst signal ON/OFF SpecialExit Remote Control / MD Output / D&N Input RS-485C Communication setting Mode Serial Data BitProduct Specification Problems & SolutionsProtocol Command Description Memo Memo