Precautions 
Installation of this product by unqualified personnel is strictly prohibited.
If the camera overheats or smoke is noticed, turn the power off immediately.
Do not expose the product to extreme |
| Do not use the product in areas where the |
heat or cold. |
| illumination levels fluctuate frequently. |
|
|
|
Experience and technical
Do not install the product in an area of high humidity or near flammable materials (e.g. oil or gas).
Using the product in an incorrect environment may cause fire, electric shock, or damage to the product.
Do not handle power plugs with wet hands.
It may cause electric shock.
It may cause fire.
Do not install the product unless the location can fully support the product’s weight.
If it is not properly supported, the product may fall.
Do not insert foreign objects into the product or disassemble the product.
It may cause fire or damage the product.
Do not expose the product to extreme heat or cold. Temperatures outside its operating temperature range
Do not drop, shake, or apply severe impact to the product.
It may damage the product.
Do not touch the glass on the front of the camera.
This is the most important part of the camera. Be careful not to leave any marks, including fingerprints, on the glass.
Fluctuating light levels caused by an unstable fluorescent lamp, for example, may cause product malfunction.
Do not point the camera towards a strong light source such as the sun.
Excessive light may cause fatal damage to the CCD.
Do not expose the product to rain or water, or place it near radioactive materials.
Water inside the camera may cause product malfunction.
COLOR CCD CAMERA 8 User’s Manual | COLOR CCD CAMERA 9 User’s Manual |