Instruction: Camera Operation
Lens Selection
This feature controls the brightness of the screen.
1.After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Lens.”
2.The lens selected with the Auto Iris lens selection switch will be displayed. (See picture on p.13)
SETUP |
|
CAMERA ID | OFF |
BACKLIGHT | OFF |
WHITE BAL. | ATW |
MOTION DET. | OFF |
LENS | DC |
SHUTTER | MANUAL |
DC/Video: Used to choose DC or VIDEO according to the type of Auto Iris Lens.
Caution
• When using a Video type auto iris lens
Properly adjust the ALC control port on the lens: the usual setting is Av.
Depending on the lens type being used, it may not operate properly in AV mode. If the lens does not adjust correctly, set
it to PEAK and adjust it by turning the LEVEL
adjustment lever in the “L” direction little by little, away from the middle position.
If the right level of light cannot be obtained, or
if the screen’s brightness fluctuates, place the cursor on Video Level Search and press the
Set button. Press End when you find the right brightness.
If the right level of light cannot be obtained and the lens is still fluctuating, point the camera towards a darker area and repeat step .
To control the brightness, increase/decrease the Brightness value. 
To control the diaphragm, increase/decrease the
COLOR CCD CAMERA 28 User’s Manual
Caution
•If an auto iris lens is used, the lens selection switch on the side of the product must be set either to DC or to Video accordingly. (See picture on p.15)
•The brightness may be adjusted if a DC/Video lens is used; the adjustment range is 1~100. Adjust to the optimum screen brightness.
•Some lenses may not work correctly in certain brightness levels.
3.Press the Set button to go back to the previous menu.
Shutter
Select either auto or manual shutter control
1.After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Shutter.”
2.Press the Left/Right buttons to select a Shutter mode.
A.FLK : Select this mode if screen flickering occurs due to a conflict between the illumination and the frequency
Manual : Select this mode for manual shutter control
SETUP |
|
CAMERA ID | OFF |
BACKLIGHT | OFF |
WHITE BAL. | ATW |
MOTION DET. | OFF |
LENS | DC |
SHUTTER | MANUAL |
AGC | HIGH |
OFF |
3.Manual mode enables manual shutter control
•The shutter speed can be from 1/60 sec. to 1/2000 sec. (x2~x128
4.Press the Set button when done.
COLOR CCD CAMERA 29 User’s Manual