Sony 560TVL user manual Exposure, Manual You can control shutter speed manually

Page 14

How to Use the Camera

EXPOSURE

MAIN SETUP

1.LENS DC 2.EXPOSURE

3.WHITE BAL ATW

4.BACKLIGHT OFF

5.SSNR ON

6.DAY/NIGHT AUTO 7.IMAGE ADJ 8.SPECIAL

9.EXIT

1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE .

2. Select a desired mode using the Up and Down buttons.

SHUTTER : You can select either auto or manual shutter.

-A.FLK : Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting.

-ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject.

-MANUAL : You can control shutter speed manually.

Notes

¥When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the installation position.

¥ESC and MANUAL modes are only available together when the lens is set to

MANUAL.

¥When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

AGC (AUTO GAIN CONTROL):

The higher the gain level, the brighter the screen - but the higher the noise.

-OFF : Deactivates the AGC function.

-LOW : Allows automatic gain control from 0 to 30dB.

-HIGH : Allows automatic gain control from 0 to 42dB.

SENS-UP :

When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated.

- OFF : Deactivates the SENS-UP function.

- AUTO : Activates the SENS-UP function.

RETURN :

Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.

Notes

¥If you press the SET button in ÔAUTOÕ mode, You can adjust brightness by increasing or decreasing the shutter speed. (X2~X256)

¥Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-image will appear.

¥Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the zoom level is increased, this is normal.

COLOR CCD CAMERA 26 User’s Manual

COLOR CCD CAMERA 27 User’s Manual

Image 14
Contents Ultimate Sensitivity SHC-745 Series Contents Features Lighting conditions Do not install in high humidity environmentDo not install under unstable May damage the CCDFront View Components and AccessoriesOverview Side View Bottom View Rear View Installation ProceduresWhen Using Auto Iris Lens LensWhen Using a CS Mount Lens When Using C/CS Mount LensPin 1 Red Power Pin 1 Damping Pin 2 NC For a Video Drive LensConnecting a Monitor When Using a C Mount LensYou can connect power as shown in the following figure Connecting PowerFor AC / DC power Use AC230V, 50Hz power source For SHC-745PHFunction Menu Structure How to Use the CameraHow to Set up the Functions DC/Video Select Auto Iris Lens Using this function, you can control screen brightnessLens Manual Select Manual LensExposure Manual You can control shutter speed manuallyWhite Balance White Bal Use the White Balance function to adjust the screen colorSelect a desired mode using the Up and Down buttons BacklightDAY In normal daylight conditions, the HLC is not activated SsnrHLC High Light Compensation OFF Not being usedButton DAY/NIGHTYou can display pictures in color or black and white Image ADJ Press the SET button Set it to ‘ON’ by using the Left and Right buttonsSpecial You can enter up to 15 lettersMotion DET Privacy Hide an area you want to hide on the screenComm ADJ Communication Adjustment ExitTroubleshooting Specifications SHC-745PHMemo