Sony 560TVL user manual Lens, Using this function, you can control screen brightness

Page 13

How to Use the Camera

Select the function using	MAIN	SETUP	Change the status using
Select the function using	1.LENS	DC	Change the status using
the UP or DOWN button.	2.EXPOSURE		the LEFT or RIGHT button.
	2.EXPOSURE
	3.WHITE BAL	ATW
	4.BACKLIGHT	OFF
	5.SSNR	ON
	6.DAY/NIGHT	AUTO

7.IMAGE ADJ 8.SPECIAL 9.EXIT

3.Set up a selected item by using the Left and Right buttons.

4.To finish the setting, select ‘EXIT’ and press the SET button.

Notes

¥An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button.

¥An item with the - - - icon is unavailable due to function settings.

LENS

Using this function, you can control screen brightness.

1. When the SETUP menu screen is displayed, select LENS by using the Up and Down buttons so that the arrow indicates LENS .

2. Select the connected lens type by using the Left and Right buttons.

MAIN	SETUP
1.LENS	DC
2.EXPOSURE
3.WHITE BAL	ATW

DC/Video : Select Auto Iris Lens

•When DC is selected, you can control screen brightness. The range of brightness control is between 1 and 70. Adjust the brightness appropriately for optimal screen brightness.

Notes

¥Some lenses may not work properly, depending on the setting of the

BRIGHTNESS LEVEL.

¥When Using a Video-Type Auto Iris Lens

Adjust the ALC adjustment terminal on the lens appropriately. In general, set it to AV (Average).

It may not work properly depending on the installed lens. Set the Level VR of the lens to the optimal value.

Set AGC to OFF and adjust the Lens VR to an appropriate brightness.

Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness changes properly. Otherwise, adjust the Lens VR again.

Manual : Select Manual Lens

COLOR CCD CAMERA 24 User’s Manual

COLOR CCD CAMERA 25 User’s Manual

Image 13

Contents Ultimate Sensitivity SHC-745 Series Contents Features Do not install under unstable Do not install in high humidity environmentLighting conditions May damage the CCDOverview Components and AccessoriesFront View Side View Bottom View When Using Auto Iris Lens Installation ProceduresRear View LensPin 1 Red Power Pin 1 Damping Pin 2 NC When Using C/CS Mount LensWhen Using a CS Mount Lens For a Video Drive LensWhen Using a C Mount Lens Connecting a MonitorFor AC / DC power Connecting PowerYou can connect power as shown in the following figure Use AC230V, 50Hz power source For SHC-745PHHow to Set up the Functions How to Use the CameraFunction Menu Structure Lens Using this function, you can control screen brightnessDC/Video Select Auto Iris Lens Manual Select Manual LensManual You can control shutter speed manually ExposureSelect a desired mode using the Up and Down buttons Use the White Balance function to adjust the screen colorWhite Balance White Bal BacklightHLC High Light Compensation SsnrDAY In normal daylight conditions, the HLC is not activated OFF Not being usedYou can display pictures in color or black and white DAY/NIGHTButton Image ADJ Special Set it to ‘ON’ by using the Left and Right buttonsPress the SET button You can enter up to 15 lettersPrivacy Hide an area you want to hide on the screen Motion DETExit Comm ADJ Communication AdjustmentTroubleshooting SHC-745PH SpecificationsMemo