How to Use the Camera
BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
BLC ON | BLC OFF |
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment parking garage or gas station entrance, removing the high light makes it possible to view car license plates efficiently.
-DAY : In normal daylight conditions, the HLC is not activated.
-NIGHT : If a high light that is larger than a certain size is present on the screen, remove the high light to see license plates clearly.
HLC MASKING AREA
HLC ON | HLC OFF |
OFF : Not being used
3. Select a desired mode using the Left and Right buttons and press the SET button.
Select ‘BLC’ to adjust the area to be enhanced and enhancement level.
HLC : Enable a user to select a mask color of
high light area from a picture.
Notes
¥Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance.
¥In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present.
¥The HLC is not activated in light or overly dark conditions.
SSNR
This function reduces the background noise in a low luminance environment.
1.When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down buttons so that the arrow indicates ’SSNR’ .
MAIN | SETUP |
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
2.Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
COLOR CCD CAMERA 30 User’s Manual | COLOR CCD CAMERA 31 User’s Manual |