Sony 560TVL user manual Day/Night, You can display pictures in color or black and white, Button

Page 17

How to Use the Camera

3.Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level.

Notes

¥You cannot set the SSNR to ÔONÕ or ÔOFFÕ when the AGC mode of the EXPOSURE menu is ÔOFFÕ.

¥When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the more the noise level will be reduced but that after image may also occur.

DAY/NIGHT

You can display pictures in color or black and white.

1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates DAY/NIGHT .

MAIN

SETUP

1.LENS

DC

2.EXPOSURE

 

3.WHITE BAL

ATW

4.BACKLIGHT

OFF

5.SSNR

ON

6.DAY/NIGHT

AUTO

7.IMAGE ADJ

 

2.Select a desired mode using the Left and Right buttons according to the picture display you want.

COLOR : The picture is always displayed in color.

B/W : The picture is always displayed in black and white.

AUTO : The mode is switched to Color in a

normal environment, but switches to B/W mode when ambient illumination

is low. To set up the sswitching time or speed for AUTO mode, press the SET

button.

-DWELL TIME : You can select the duration time about changing the day/night mode. 5s, 7s, 10s, 15s, 20s, 30s, 40, 60s

-DURATION : You can select brightness of illumination about changing the day/night mode.

 

Color

B/W

B/W

Color

 

Fast

2.5 lux

 

4 lux

* The brightness of illumination is changeable

Slow

0.8 lux

 

6 lux

by installed environment.

EXTERN : This mode allows you to apply a desired filter to external signals.

Notes

¥When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur.

¥You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ÔOFFÕ. At this time, the exchange between DAY mode and NIGHT mode operates as like selecting ÔCOLORÕ mode.

¥The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable camera operation.

¥The camera may focus less well under infrared illumination than under normal illumination.

¥Since the camera may not focus as well under infrared illumination at night as it does under normal illumination, install an Extra-low Dispersion Lens to obtain sharp pictures.

COLOR CCD CAMERA 32 User’s Manual

COLOR CCD CAMERA 33 User’s Manual

Image 17
Contents Ultimate Sensitivity SHC-745 Series Contents Features Do not install under unstable Do not install in high humidity environmentLighting conditions May damage the CCDFront View Components and AccessoriesOverview Side View Bottom View When Using Auto Iris Lens Installation ProceduresRear View LensPin 1 Red Power Pin 1 Damping Pin 2 NC When Using C/CS Mount LensWhen Using a CS Mount Lens For a Video Drive LensWhen Using a C Mount Lens Connecting a MonitorFor AC / DC power Connecting PowerYou can connect power as shown in the following figure Use AC230V, 50Hz power source For SHC-745PHFunction Menu Structure How to Use the CameraHow to Set up the Functions Lens Using this function, you can control screen brightnessDC/Video Select Auto Iris Lens Manual Select Manual Lens Manual You can control shutter speed manually ExposureSelect a desired mode using the Up and Down buttons Use the White Balance function to adjust the screen colorWhite Balance White Bal BacklightHLC High Light Compensation SsnrDAY In normal daylight conditions, the HLC is not activated OFF Not being usedButton DAY/NIGHTYou can display pictures in color or black and white Image ADJ Special Set it to ‘ON’ by using the Left and Right buttonsPress the SET button You can enter up to 15 lettersPrivacy Hide an area you want to hide on the screen Motion DETExit Comm ADJ Communication AdjustmentTroubleshooting SHC-745PH SpecificationsMemo